Radxa's Linkr is a small IP KVM: a box that captures a computer's video output and injects keyboard and mouse input, so you can operate that machine from a web browser, BIOS screens included. On November 15, 2026, CNX Software published a hands-on review of the device. The reviewer updated the unit to Radxa's firmware v1.6.0, released on GitHub on October 21, which added H.265 encoding and support for custom HTTPS certificates. The review's verdict is mostly positive. It also lists several rough edges that anyone buying one should know about.

What the Linkr is, and how you reach it

According to CNX Software, the Linkr works over USB, Ethernet or Wi-Fi. It is controlled from the browser through linkr.now and needs no client software. Radxa's own documentation says the same: linkr.now provides browser-based discovery and management of multiple Linkr devices on the local network "without installing a client." The docs are organized into Getting Started, Basic Usage, Advanced Usage, Plugins and Developer Documentation. The developer section covers an AI Agent Interface.

A note on hardware. We did not retrieve Radxa's hardware specification table, so this article makes no claims about the SoC, RAM or storage. The only hint in our sources is that the review says the firmware's recovery image is used with the Rockchip flashing tool. That does not tell you which chip is inside.

Video: four codecs, one browser caveat

The review lists four streaming modes: H.264 over WebRTC, H.264 over WebSocket, H.265, and MJPEG. H.265 is the one added in v1.6.0. In CNX Software's testing it worked in Chrome but failed in Firefox with the error "Unable to negotiate video codec." If Firefox is your main browser, plan to stay on one of the H.264 modes or MJPEG.

For resolution and refresh rate, the reviewer reports support for up to 1080p30 and 1440p60. The review records its test mode as 2560x1400 at 30 Hz. Radxa's v1.6.0 notes also add a 720p 180 fps EDID preset. The EDID is the data the Linkr reports to the host computer to say which display modes it accepts.

Security: HTTPS fixes a setup problem, if you use it

The review's most important practical finding is about first-time setup. Over plain HTTP, initial setup exposes the username, device name and hashed password on the LAN, as the reviewer saw in a Wireshark capture. A hash is better than a clear password, but an attacker can still use it to access the device. CNX Software's advice is to do the initial setup over USB, and the reviewer enabled the self-signed TLS option in Advanced Settings after setup.

Firmware v1.6.0 goes beyond self-signed certificates: the release notes say you can now load custom HTTPS certificates. For a device that controls a machine at the firmware level, that matters. Encrypted transport should not be treated as optional on an IP KVM.

The reviewer confirmed two other security features. Two-factor authentication works with an authenticator app (Google Authenticator in the test), and remote access works through Tailscale. Radxa's earlier v1.5.0 release (September 18, 2026) added a Plugin Center with ZeroTier and EasyTier plugins, so there are other overlay-network options as well.

The rough edges

Among the problems CNX Software reported:

  • The OTA update wiped settings. The review unit was running firmware v1.0.0. Updating to v1.6.0 erased its configuration, and the reviewer had to set the username, password and device name again. The update also took about an hour. Anyone updating from early firmware should write down their settings first.
  • H.265 does not work in Firefox, as described above.
  • Linkrd.apk was not available. The Linkrd plugin is needed for clipboard sharing, and the virtual disk requires Linkrd.img, which is part of the missing file. Radxa's v1.6.0 notes list bidirectional clipboard sync as a new feature that needs an executable from the Linkrd plugin on the controlled computer. Until that plugin is published, clipboard sync and virtual disk may not be usable in practice.

What changed in v1.6.0, and just before it

Radxa's GitHub release notes for v1.6.0, published October 21, 2026, list these changes:

  • H.265 encoding
  • Custom HTTPS certificates
  • Bidirectional clipboard sync (requires an executable from the Linkrd plugin on the controlled computer)
  • A 720p 180 fps EDID preset
  • A watermark toggle
  • Fix: upload progress no longer sticks at 100% while large files go through MD5 verification

Two earlier releases explain where the feature set came from:

  • v1.5.2 (October 8, 2026): double-pressing the FN button toggles the Wi-Fi hotspot, and the hotspot band selection changed: 5 GHz when Wi-Fi is not connected or is on a 5 GHz network, 2.4 GHz when connected to a 2.4 GHz network.
  • v1.5.0 (September 18, 2026): added the Plugin Center, ZeroTier and EasyTier plugins, OCR, experimental IPv6 and Agent API controls for resolution and video quality.

From September 18 to October 21 is about five weeks, with at least three releases in that span. Features are arriving quickly, and the review unit, which was on v1.0.0 when the reviewer tested it, was far behind the current feature set.

What It Means for Makers

The Linkr suits people who run headless machines: homelab servers, build boxes, single-board computers on a shelf, or a classroom machine that needs remote reinstalls. Because it captures the display and injects keyboard input at the hardware level, it reaches places SSH and VNC cannot, such as BIOS menus; the reviewer entered the BIOS of the test mini PC through it. Reaching it through a browser at linkr.now, with no client to install, makes it easy to use from any machine on the LAN. Tailscale support and the ZeroTier and EasyTier plugins offer options for remote access.

CNX Software compares it to GL.iNet's Comet (GL-RM1). The reviewer calls the Comet the more complete solution, but larger and more expensive. Don't assume the Linkr matches the Comet feature for feature.

Before you rely on it:

  • Set it up over USB, or switch on TLS right after setup.
  • Check which firmware your unit has and update if needed; record your settings first, since the review's update erased them.
  • Use Chrome if you want H.265.
  • Don't count on clipboard sync or virtual disks until Radxa publishes Linkrd.apk.

Price and availability: As of CNX Software's November 15, 2026 review, the Linkr is on sale from $59 (USD) at AliExpress, Amazon, Arace and Allnet. Prices vary by retailer. Radxa supplied the review sample.

Sources