Every phone with a cellular radio already contains most of a software-defined radio: an RF front end, a synthesizer, mixers, ADCs and a DSP that turns the result into digital baseband samples. The trouble is that all of it sits behind closed modem firmware that only ever hands the application processor decoded data. Logan Zarov's D325f-SDR pries that door open on one specific handset, the LG D325 (sold as the L70 Dual), and gets raw IQ samples out of its Qualcomm modem. Then it does something stranger: to listen below the modem's native tuning range, it turns the phone's Bluetooth transmitter into a local oscillator.
The project was picked up by RTL-SDR.com, which wrote it up on 27 October 2026, and by Hackaday, which published its write-up on 9 November.
How the modem becomes a receiver
According to RTL-SDR.com, the phone's modem is a Qualcomm MSM8610 running Hexagon firmware, and D325f-SDR works by applying a small patch to that firmware so that it streams raw samples into a shared memory buffer set up by a custom kernel. The repository describes the output as 7.68 MS/s CI8 IQ, meaning 8-bit complex samples, which it puts at about 5 MHz wide. RTL-SDR.com gives the same figures: 8-bit IQ at 7.68 MS/s, about 5 MHz of bandwidth.
What the receiver is not, at least not yet, is characterised: RTL-SDR.com notes that calibrated sensitivity figures have not been published.
The tuning range the modem's own synthesizer can cover is narrow and high. RTL-SDR.com reports that tuning works by hooking into the modem's stock PLL calculation, with PLL lock confirmed from 1.7 to 2.17 GHz. As a demonstration, the project received an 1875 MHz cellular base station downlink.
The Bluetooth trick
Reaching FM broadcast or shortwave from a 1.7 GHz-and-up tuner would normally call for an upconverter. D325f-SDR uses hardware already in the phone instead. Per RTL-SDR.com, the app keys the phone's Bluetooth transmitter to produce a carrier in the 2.4 GHz ISM band, and uses that carrier as a mixer. The repository states that below 1000 MHz (the default) the Bluetooth transmitter serves as the local oscillator; RTL-SDR.com describes the technique as the way to get below 800 MHz.
With that arrangement, the reported reception results include:
- FM broadcast stations
- A 551.25 MHz analog TV carrier
- Shortwave AM between 8 and 15 MHz, including intelligible speech at 14.970 MHz
Hackaday describes the result as reception in the MHz range, including shortwave, achieved by using the Bluetooth radio as a local oscillator, and the project includes a video of it working.
There is a side effect. The repository says the app has no network features at all, because while Bluetooth runs as a continuous carrier, Wi-Fi on the LG does not work properly.
The app
On the Android side, the repository lists app version 2.0 (version code 20000), built for ARMv7 and requiring Android 7.1 or later. It demodulates AM, NFM, WFM, USB, LSB and CW, and draws a real-time spectrum and waterfall display. RTL-SDR.com says the app is based on Dennis Mantz's RF Analyzer, and the repository says it includes RF Analyzer code.
RTL-SDR.com flags a practical weakness: the modem-side buffer is only about 8 ms long, so if the phone's CPU gets busy, the stream can stop.
What it takes
This is not an install-an-APK project. The repository's tested setup, which it says the author confirmed working on 24 October 2026, is:
- LG D325 (codename w5ds)
- LineageOS 14.1
- TWRP recovery
- Root access
- Stock baseband M8610B-AAAANAZM-1.0.6047
- Running from a microSD card, because the author's eMMC has failed
The repository also has the user flash a custom kernel build from TWRP, and RTL-SDR.com likewise lists a custom kernel among the requirements. Hackaday summarises the software side as a rooted phone running LineageOS, with a modem firmware update supplying the SDR baseband.
There is a hardware modification as well. The repository describes B8 and B1 bypass wires brought out to the phone's 3.5 mm jack, with an antenna connected through an SMA adapter; RTL-SDR.com calls it a homemade SMA-to-3.5 mm adapter. Hackaday refers to a mod for an antenna wire and describes the conversion as very minor modification. The repository states that the software steps are reversible; it makes that claim about the software, not the wiring.
The caveats, stated plainly
Very limited testing. RTL-SDR.com lists testing on a single phone as a limitation. The repository adds that SDR and live IQ worked on two LG D325f phones, the author's first prototype (later broken by further hardware modifications) and the current phone. Nothing in the sources says the patch works on any other handset, and the setup is documented against one specific stock baseband build.
No sensitivity numbers. As noted above, there are no published calibrated sensitivity figures, and RTL-SDR.com adds that the Bluetooth carrier coupling technique has not been characterised either. Comparisons with dedicated receivers are guesswork for now.
Regulatory grey area. RTL-SDR.com points out that the phone actively transmits a Bluetooth carrier in the below-800 MHz mode, which probably violates the Bluetooth module's certification and could make the mode legally grey. The receiver works by deliberately running a transmitter outside its certified behaviour, and anyone trying it should keep that in mind.
AI assistance. The repository says AI tools assisted with code development and documentation, and RTL-SDR.com repeats that in an AI disclaimer. Some Hackaday commenters also dismiss the project as AI-generated, while others defend the use of AI tools in reverse engineering. Given how deep into modem firmware this goes, anyone tempted to try it may want to read the patch carefully before flashing anything.
What It Means for Makers
D325f-SDR is first and foremost a proof of concept for radio hobbyists and embedded tinkerers who like firmware reverse engineering. It shows that a cellular modem's baseband can be redirected to give general-purpose IQ output, and that a phone's other radios can be repurposed to stretch its tuning range. If you have an LG D325 in a drawer, it offers a roughly 5 MHz-wide receiver with a built-in screen and battery, at the cost of rooting, reflashing a custom kernel and modem patch, and soldering.
Realistically, it is an experiment rather than a replacement for a purpose-built USB SDR dongle. A dongle needs no firmware patching, and does not require running a Bluetooth carrier outside its certification. This project has no published sensitivity figures. Its value is in the technique: an open, documented path into Hexagon modem firmware that others can study and possibly port.
On price and availability: the software is free and open source, with the combined application under GPL-3.0-or-later, and the code is on GitHub now. The repository labels it experimental. None of the sources give a price for the hardware; it targets a specific older handset that you would need to find secondhand. There is just a repository, a demo video, raw IQ recordings and one documented phone, with results reported by the author and covered by RTL-SDR.com and Hackaday.